Comac CS500 Walk-Behind Sweeper — CS500BT

Overview

The Comac CS500 is a compact, battery-powered walk-behind sweeper built for fast, low-cost dust and debris control inside or out. With a ~26″ working width (side broom engaged), a 50 L (~13 gal) lift-out hopper, traction drive, and a high-surface-area panel filter with a manual shaker, the CS500 keeps airflow strong while capturing fine dust—ideal for warehouses, schools, retail, garages, sidewalks, and small lots.

Features

• Edge-to-edge pickup: Main cylindrical broom plus right side broom reaches corners and along walls

• Dust control: Large panel filter with manual shaker; optional electric shaker & HEPA media

• Traction drive (BT): Smooth, controllable forward speed reduces operator fatigue

• 50 L high-capacity hopper: Lift-out, easy to dump; long runs between empties

• Durable shell: Impact-resistant body with protective skirts and bumper rollers

• Simple controls: Intuitive levers/switches; quick access to broom, filter, and hopper

• Indoor/outdoor ready: Designed for hard floors—concrete, tile, sealed surfaces, pavers

Specifications

• Working width: ~26″ (650 mm) with side broom • ~20″ (500 mm) main broom

• Hopper capacity: 50 L (~13 gal) lift-out rear hopper

• Filter area: ~35 ft² (~3.3 m²) panel filter; manual shaker

• Max productivity (theoretical): up to ~28,000 ft²/hr (≈ 2,600 m²/h)

• Power: 12 V battery system (BT traction drive)

• Runtime (typical): up to ~2–3 hrs per charge (use-dependent)

• Traction speed: variable; operator-set

• Primary use: Dry debris on indoor/outdoor hard floors

• Noise level: ~70–74 dBA (use-dependent)

• Dimensions (L × W × H): approx. ~50–52″ × 26″ × 40″

• Weight: approx. ~150–190 lb (configuration-dependent)

Installation (Setup & Use)

1. Unbox & inspect; charge the battery fully before first use.

2. Set broom heights: Adjust side broom for light bristle contact; set main broom for proper pickup.

3. Start sweeping: Engage traction, brooms, and suction; sweep in overlapping passes.

4. Maintain airflow: Use the manual filter shaker periodically during shifts and at end of day.

5. Empty the hopper into an approved receptacle; re-seat until it latches securely.

6. End of shift: Clean the machine, raise brooms, and place on charge.

What’s in the Box

• Comac CS500BT walk-behind sweeper

• Main cylindrical broom (installed)

• Right side broom (installed)

• Panel dust filter with manual shaker (installed)

• 50 L lift-out hopper

• Battery & charger (BT configuration)

• Operator’s manual / quick-start guide

Important Details

• Designed for dry debris only; do not pick up liquids, hot ash, or solvents.

• Real-world performance depends on broom height, operator speed, floor texture, and filter cleanliness.

• Replace worn main/side brooms and inspect seals/skirts to maintain pickup and dust control.

• HEPA-grade filter media and an electric shaker are available on select configurations.

Warranty

Machine: 1-year limited (parts & labor). Wear items (brooms, filters, skirts) excluded. (Battery/charger coverage may follow component manufacturer terms.) Keep proof of purchase.